Alliance Supplies Sdn Bhd
Main Office :
No.7 & 7-1, 9 & 9-1,
Jalan PB 1B,
Taman Puncak Bertam,
75250 Melaka, Malaysia.
+606-3338889
+606-3338887
+606-3338898
+606-3338899
info@alliance-supplies.com
Subang Warehouse:
Lion Industrial Park, No.3 Lot 2-2, Jalan SU 6A, Seksyen 22, Taman Perindustrian Subang, 40300 Shah Alam, Selangor, Malaysia.Branch (JB):
Branch (PG) :
Unit 1.01, Ground Floor, Menara Boustead, 39, Jalan Sultan Ahmad Shah, George Town, Penang, 10050 Malaysia.
Unit 1.01, Ground Floor, Menara Boustead, 39, Jalan Sultan Ahmad Shah, George Town, Penang, 10050 Malaysia.
Office (Miri):
Lot 604, Ground Floor, Pelita Commercial Centre, Jalan Miri-Pujut, 98000 Miri, Sarawak, Malaysia.Opening Hours:
8.00 a.m - 5.00 p.m
Monday - Friday
DEFELSKO ICRI Concrete Surface Profile Chips (Set of 10)
| Previous | 5 / 5 | Next |
ICRI Concrete Surface Profile Chips (Set of 10)
The International Concrete Repair Institute (ICRI) produces 10 distinct concrete profiles formed by various surface preparation methods. Each profile carries a CSP number ranging from CSP 1 (nearly flat) to CSP 10 (very rough; amplitude greater than ¼” [6 mm]).
These chips are designed as a visual and tactile comparator for identifying the degree of surface roughness. The user compares prepared concrete to the CSP chips and reports the chip number that most closely resembles the surface. Many jobs will specify the type of surface preparation required.
The ICRI CSP Chips are approximately 16 square inches (3.5” x 4.5”) and are designed to replicate 10 surface profiles shown below.
Available with or without Technical Guideline (no. 310.2R-2013) Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings, Polymer Overlays, and Concrete Repairs prepared by ICRI.
*Average of 15 readings, based on the data generated in this study
Look-up Table (Conversion of ICRI Panels to mils)
Description
ICRI CSP No.
Digital Depth Micrometer / ASTM D8271 (mils)*
Learn More
6 ± 2
1
6 ± 2
Grinding 2 Acid-etched
11 ± 2
3 Light Shotblast
15 ± 2
4
16 ± 2
Light Scarification 5 Medium Shotblast Medium Scarification 6
37 ± 4
Heavy Abrasive Blast Scabbled/Surface Retarder
48 ± 4
7 Heavy Scarification
Not measured
Handheld Concrete Breaker/Abrasive Blast Cleaned; or High-Pressure Water Jetting 8
Not measured
9 10
Not measured
|
Concrete Surface Profile Chips with Technical Guideline
- Set of 10 Concrete Surface Profile Chips (CSP 1 - 10)
- Technical Guideline (no. 310.2R-2013)
The guide provides owners, specifiers, contractors, and manufacturers with the information required to select and specify the methods for preparing concrete surfaces prior to the application of a protective system or repair material.
Concrete Surface Profile Chips only
- Set of 10 Concrete Surface Profile Chips (CSP 1 - 10)