Alliance Supplies Sdn Bhd
Main Office :
No.7 & 7-1, 9 & 9-1,
Jalan PB 1B,
Taman Puncak Bertam,
75250 Melaka, Malaysia.
+606-3338889
+606-3338887
+606-3338898
+606-3338899
info@alliance-supplies.com

Branch (JB):
No. 5, Jalan Banang Satu, Taman Johor Industrial Estate, 81200 Johor Bahru, Malaysia.

Subang Warehouse:
No. 7 Jalan SS13/3E, Subang Jaya Ind. Estate, 47500 Subang Jaya, Selangor, Malaysia.

Office (Miri):
Lot 604, Ground Floor, Pelita Commercial Centre, Jalan Miri-Pujut, 98000 Miri, Sarawak, Malaysia.

Opening Hours:
8.30a.m - 6.00p.m
Monday - Friday

PosiTest HHD Verifier

Previous 3 / 6 Next

PosiTest HHD Verifier 3.14 Defelsko Verification Standards 03.DEFELSKO


PosiTest® HHD Verifier

 

PosiTest HHD Verifier standalone voltmeter (crest meter, jeep meter) for verifying the accuracy and operation of pulse type and DC holiday detectors*


 
Ideal for field/laboratory verification of the PosiTest HHD High voltage Holiday Detector
* Operation on some DC holiday detectors may yield higher than expected results due to specific detector design.


simple icon

Simple

  • Ideal for field/laboratory verification of pulse and continuous DC holiday detectors
  • Wide measurement range: 0.5 – 35 kV
  • Simple two step operation
  • Lightweight/Portable — requires no external power source
  • Certificates of Calibration showing traceability to NIST included
  • Two year warranty
  • Made in USA
specifications icon

Specifications

Voltage Range
0.5 – 35 kV
Resolution
0.5 kV – 1 kV: 10 Volt Steps
1 kV – 35 kV: 100 Volt Steps
Accuracy
±5%
Operating Temperature
-20° to 60° C (-4° to 140° F)

Easy Operation
  1. Ensure that the ground lead is plugged into the PosiTest HHD Verifier and that the other end of the ground lead is connected to the ground lead of the high voltage holiday detector that is being verified.
  2. Turn the PosiTest HHD Verifier on by pressing and releasing the power button. Once powered on, the verifier continuously monitors the voltage on the probe on the end of the verifier. The verifier will update the display when the probe is touching an exposed electrode of a holiday detector. The voltage displayed on the verifier should match the voltage displayed on the detector within the combined tolerance of both units. For Continuous DC holiday detectors, the verifier probe tip should just be tapped against an exposed electrode to obtain a measurement.

Device comes complete with verifier, 1.8 m (6') ground wire, 3 AAA batteries, instructions, Long Form Certificate of Calibration traceable to NIST, two year warranty
  • Size: 43 x 5 x 5 cm (17'' x 2'' x 2'')
  • Weight: 476 g (1.05 lbs.)
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version